Announcements
Prodigy launches PCIe Gen 6 Protocol Analyzer with 64 GT/s capture capability
Serial Presence Detect (SPD) is a standardized method to automatically access the information about DDR3/4/5 memory modules. When a electronic system us powered on, it starts doing automatically configuring the system by identifying different hardware components. SPD is a feature in DDR3/4/5 enables the electronic system to know the DDR memory details and its timing […]
Conquering the Timing Challenges in I3C communication with Prodigy’s Solutions! One of the primary challenges in designing I3C Protocol communication is the occurrence of timing issues, which can cause communication errors. This will be challenging to debug for the engineers. To address this, Prodigy Technovations Pvt. Ltd (Prodigy) provides an I3C Protocol Analyzer and Exerciser that provide precise timing analysis […]
Introduction to I2C Protocol: I2C stands for Inter-Integrated circuit. It can also be referred to as IIC or I2C. I2C Protocol is a serial communication protocol, and it is widely used for short-distance communication. It provides simple and robust communication between the Peripheral device and the microcontroller. I2C Protocol consists of two wires SDA and […]
Sensor Challenges in Next Generation Consumer Devices, IOT, and Automotive Design. Over the last decade, we have seen an explosion of mobile phone devices along with sensors on the devices. Right from accelerometers, gyroscopes, ambient light, proximity, infrared, humidity, and temperature. These sensors are great for the consumer experience from the system integration poses a […]
What is MIPI I3C? The MIPI I3C Bus interface is an evolutionary specification that builds upon the legacy I2C standard. The aim is to reduce the number of physical pins used in sensor system integration and supports low-power, high-speed digital communication typically associated with UART and SPI interfaces so that I3C becomes a single interface […]
Embedded System Testing : Embedded Systems have multiple devices and each of the devices uses the bus to communicate with the main chip or processor and other devices in the system. The Embedded system generally has SPI or I2C device to communicate with the EEPROM device and I3C to communicate with the sensor interface. The […]
If you are in the market for buying or choosing a Protocol Analyzer, how do you know which one is the right one for you? There are many options to choose from and looking at the various technical specifications can be a daunting task. This article gives you some factors to consider when considering your […]
5 Questions You Should Ask When Choosing a Protocol Analyzer: When choosing a Protocol Analyzer most engineers or managers ask for basic questions like protocol specification support and the kind of trigger required on the bus. However, these are five very important questions that are asked only by experienced validation engineers. The five important questions […]
What is I2C Protocol? I2C stands for Inter IC communication. I2C Protocol is a simple two-wire protocol used to communicate between two devices or chips in an embedded system. What is I3C Protocol? I3C has got the extra I over the standard I2C. Improved Inter IC communication protocol. I3C Protocol has improved over I2C Protocol […]
How to Choose a Logic Analyzer? If you are in the market for buying or choosing a Logic Analyzer, how do you know which one is right for you? There are several options to select from and looking at the various technical specifications can be a daunting task. This article gives you some factors to […]
